53 found, showing page 1 of 4
$50.295
3LB ZIP & MIX RPR MORTAR
Multipurpose polymer-modified, rapid setting, high strength repair material. Use to repair concrete cracks, curbs, steps, pre-stressed panels, pipe, tunnels, sewers, loading docks, silos, retaining walls, culverts, catch basins, decorative moldings, bridge columns, parapet walls, septic tanks, cold storage vaults - virtually any vertical or overhead concrete surface. Mix with water in bag provided. Knead bag until thoroughly mixed and apply. Trowel tool included. Build up to 2" in thickness in 1 application. After initial set, the material may be trimmed and shaped to match the contours of the existing patch area. 3 lb. bag - yields approximately 0.03 cu. ft. of material.
View Details
$42.99
10 OZ CNCRT CRK SEALANT
Polyurethane Concrete Crack Sealant is a textured 1-component, fast curing, flexible material that provides a durable elastic bond and helps prevent water and ice damage. Suitable for interior and exterior concrete crack application. Excellent adhesion to concrete, masonry, stucco, pre-painted metal, glass, plywood, aluminum, steel, and many plastics and composites. Can be applied to vertical or horizontal surfaces. Standard caulk gun use. Covers approximately 12 linear ft. in a 3/8" bead. Tack-free in 2 hours and fully cured in 5 to 8 days. 10 oz. tube.
View Details
$162.99
8.6OZ FS ANCHORING EPOXY
FastSet anchoring epoxy is a 2 component nonsag structural epoxy that is moisture insensitive and low odor. Use for anchoring bolts, threaded rods, tie bars, and rebar dowels into concrete and masonry substrates. Can also be used for bonding raised reflective pavement markers to concrete or asphalt pavement. Suitable for fastening in grout-filled block and unreinforced masonry, and seismic anchoring and bracing. Can be applied to vertical or horizontal surfaces. standard caulk gun use. Working time of 4 to 5 minutes. Sets in sub-freezing temperatures. Compressive yield strength of 10,000 P.S.I. in 7 days. Color: Gray. 8.6 oz. tube.
View Details
$45.99
QT CONCRT PATCH COMPOUND
Concrete patching compound is ready-to-use trowel applied textured acrylic for crack and small repairs. Repairs and fills surface imperfections and cracks up to 1/4" deep in concrete, masonry, stucco, patios, sidewalks, and driveways. Weather-resistant - helps prevent water and ice damage to concrete surfaces. Dries quick to a durable and flexible finish. Easy clean up with water before product dries. 1 quart covers approximately 3.25 sq. ft. at a 1/8" thickness.
View Details
$144.99
8.6OZ HIGH STR ANCHORING EPOXY
FastSet anchoring epoxy is a commercial grade, 2 component nonsag structural epoxy that is moisture insensitive and low odor. Use for anchoring bolts, threaded rods, tie bars, and rebar dowels into concrete and masonry substrates. Can also be used for bonding raised reflective pavement markers to concrete or asphalt pavement. Suitable for fastening in grout-filled block and unreinforced masonry, and seismic anchoring and bracing. For use in horizontal applications. To be applied with heavy-duty professional caulking gun. Extended working time of 15 minutes to allow for adequate placement time. Compressive yield strength of 10,000 P.S.I. in 7 days. Color: Gray. 8.6 oz. tube.
View Details
$28.99
10OZ CONCRETE REPAIR
Ready-to-use, specially designed crack filler and sealer for repairs to vertical and horizontal concrete, masonry, and stucco surfaces. Sanded acrylic formula blends with the texture and color of concrete surfaces. Helps prevent water and ice damage to masonry surfaces. Weather-resistant. Apply no thicker than 3/8" in 1 application. Allow 24 hours before painting.
View Details
$42.00
10 OZ SELF-LVL SEALANT
Superior 1 component self-leveling sealant provides superior adhesion, flexability, and durability. Construction grade polyurethane sealant is used for sealing cracks and joints in horizontal concrete surfaces such as sidewalks, driveways, industrial floors, parking decks, patios, and steps. May also be used for flashing and below grade waterproofing membranes. Sealant is nonstaining, resistant to moisture and staining, and has virtually no shrinkage. Standard caulk gun use. Coverage is 12 linear ft. at 1/2" x 1/4" joint. Color: Gray. 10 oz. tube.
View Details
$160.99
25LB ROCKITE CEMENT
Expands as it sets, never comes loose, never shrinks. Mixes with water only, applied cold, sets stronger than concrete in 1 hour. Good for all interior and exterior DIY jobs. Use to anchor bolts, screws, railing, etc. Use for patching concrete and brick. Use for feathering light cracks and gaps, etc. Dries off-white. Packed in plastic bags within carton.
View Details
$299.99
50LB ROCKITE CEMENT
Expands as it sets, never comes loose, never shrinks. Mixes with water only, applied cold, sets stronger than concrete in 1 hour. Good for all interior and exterior DIY jobs. Use to anchor bolts, screws, railing, etc. Use for patching concrete and brick. Use for feathering light cracks and gaps, etc. Dries off-white. Packed in plastic bags within carton.
View Details
$43.976
QT CNCRT BNDNG ADHESIVE
A general-purpose acrylic latex bonding agent and admixture for mortar and concrete. Use as a bonding agent for bonding new concrete to old, or as an additive for SikaRepair mortars to increase the adhesion and performance, and create a tougher surface. Add SikaLatex R in place of water, and mix to a desired consistency. Color: Milky white. Follow concrete and or mortar instructions to correct proportions.
View Details
$40.99
2-1/2LB CEMENT ANCHOR
Cement-based, quick-set, waterproof cement for setting bolts, hooks, fence posts, mailbox posts, hand railings, wood, metal, plastic or fixtures into concrete. Use on concrete, brick, and stone. Instantly seals wall-floor joints, mortar cracks, holes, chimneys and pipe. Non-shrinking, high strength, and waterproof. Sets in 30 minutes. Interior/exterior. Just add water.
View Details
$65.49
2-1/2LB WATERPLUG CEMENT
Formerly known as Waterplug Hydraulic Cement, MasterSeal 590 is a quick setting hydraulic cement used to instantly stop running water or seepage through holes or cracks in concrete and masonry, and as an anchoring cement to secure bolts or posts in horizontal concrete or masonry. It expands as it sets to lock into place even under constant water pressure.
View Details
$119.99
12LB THOROCRETE PATCH
A 1-component, acrylic modified, cement base patching and resurfacing material for concrete and masonry. Ready-to-use; just add water. Self-bonding, easy-to-apply, quick setting. It possesses durability, has excellent bond to clean, structurally sound concrete, good color retention and is self-curing. Used for: Resurfacing concrete floors, driveways, and sidewalks. 40 lb. will cover 40 sq. ft. 1/8" thick; 20 sq. ft. 1/4" thick, or 10 sq. ft. 1/2" thick.
View Details
$79.99
10LB ROCKITE CEMENT
Expands as it sets, never comes loose, never shrinks. Mixes with water only, applied cold, sets stronger than concrete in 1 hour. Good for all interior and exterior DIY jobs. Use to anchor bolts, screws, railing, etc. Use for patching concrete and brick. Use for feathering light cracks and gaps, etc. Dries off-white. Packed in plastic bags within carton.
View Details
$120.99
7LB CONCRT WATERPROOFER
A Portland cement-based waterproofing coating for sealing, protecting, and decorating vertical walls constructed of concrete, masonry, brick, or stucco. Just add the powder to water. For previously painted or nonporous surfaces use DamtiteBonding Liquid. It eliminates dampness and resists mildew, flaking, or chalking while beautifying and sealing all poresand voids. Unlike ready-mixed paints that can only be applied to dry surfaces, it is made to be used on damp walls. Safe for coating drinking water holding tanks or cisterns, birdbaths, and fountains. Reduces radon gas penetration through concrete block walls. Color: White.
View Details